Too bad a house doesn't come with an owner's manual. And a
week-long seminar where you learn what every button, switch, and wire is for.
Alas, the keys to the castle come with no troubleshooting guide to dog-ear—and,
we're betting, no wise master to unlock the mysteries of the place you call
home.
Then again, that's what we're here for: to provide fast fix-it advice when it's time for you to do your home owning duty. Because at some point, you're going to have to know how to change out a light fixture without zapping yourself to kingdom come. Or paint a double-hung without gumming up the works. Or stem the flood when the toilet overflows. And you're going to want to do things right. The first time.
Then again, that's what we're here for: to provide fast fix-it advice when it's time for you to do your home owning duty. Because at some point, you're going to have to know how to change out a light fixture without zapping yourself to kingdom come. Or paint a double-hung without gumming up the works. Or stem the flood when the toilet overflows. And you're going to want to do things right. The first time.
This particular type of water torture is likely due to a
failed washer inside a handle. The faucet is just the messenger.
To replace the washer, turn off the water supply valve under the sink. Stuff a rag in the drain so you don't lose parts, then take the handle apart. Pop the screw cover on top, remove the screw, and pull off the handle. Use a wrench to disassemble the stem, and line the parts up on the counter in the order they came off, so you know how it goes back together. Examine rubber parts or plastic cartridges for cracks, and take the offending piece to the hardware store for an exact replacement. Reassemble the parts you've laid out, in reverse. Then revel in the ensuing peace and quiet.
source: http://www.thisoldhouse.com/toh/photos/0,,20434090,00.htmlTo replace the washer, turn off the water supply valve under the sink. Stuff a rag in the drain so you don't lose parts, then take the handle apart. Pop the screw cover on top, remove the screw, and pull off the handle. Use a wrench to disassemble the stem, and line the parts up on the counter in the order they came off, so you know how it goes back together. Examine rubber parts or plastic cartridges for cracks, and take the offending piece to the hardware store for an exact replacement. Reassemble the parts you've laid out, in reverse. Then revel in the ensuing peace and quiet.
this old house magazine
http://www.guaranteedplumbingco.com
No comments:
Post a Comment